Click on photo for
larger view |
POT, Peavey™ "BRACKET" TYPE, PC MOUNT, 16mm DIAMETER BODY
Used in many Peavey amp and mixer
models. This pot has a 3/16" metal knurled shaft. Select part number/value
in Options.
DOES NOT INCLUDE NUT OR WASHER. IF NEW NUT IS NEEDED, ORDER the
PNW-16 NUT AND WASHER SET.
IMPORTANT NOTE:
THIS STYLE OF POT WAS USED IN MANY PEAVEY AMPS FROM THE 1990s AND EARLY 2000s,
BUT PEAVEY IS NOW SLOWLY PHASING THESE OUT. SOME VALUES HAVE ALREADY
BEEN DISCONTINUED. WHEN STOCK RUNS OUT, NO MORE WILL BE
MANUFACTURED.
|
NEW PEAVEY # |
OLD PEAVEY # |
VALUE |
COMMENTS |
|
31190528 |
71190528 |
A10K |
AUDIO |
|
31190510 |
71190510 |
B10K |
LINEAR |
|
31190523 |
71190523 |
C10K |
REV. AUDIO |
|
31190518 |
71190518 |
B20K |
LINEAR |
|
31190512 |
71190512 |
A50K |
AUDIO |
|
31190511 |
71190511 |
B50K |
LINEAR |
|
31190521 |
71190521 |
A100K |
AUDIO |
|
31190517 |
71190517 |
B100K |
LINEAR |
|
31190531 |
71190531 |
C100KX2 |
DUAL REV. AUDIO |
|
31190514 |
71190514 |
A250K |
AUDIO |
|
31190515 |
71190515 |
B250K |
LINEAR |
|
31190516 |
71190516 |
A1M |
AUDIO |
|
31190522 |
71190522 |
>>> USE 31190516 |
A1M AUDIO |
Part #P-VB-XX |
$20.95 |
|
Click on photo for
larger view |
POT, Peavey™ "SPIDER" TYPE, PC MOUNT, 16mm DIAMETER BODY
Used in many Peavey amp and mixer models. This pot has a
3/16" metal knurled shaft, and is designed to replace some earlier Peavey spider pots with knurled plastic shafts.
Select part number/value in Options.
DOES NOT INCLUDE NUT OR WASHER. IF NEW NUT IS NEEDED, ORDER the
PNW-16 NUT AND WASHER SET.
IMPORTANT NOTE:
THIS STYLE OF POT WAS USED IN MANY PEAVEY AMPS AND MIXERS FROM THE 1990s AND
EARLY 2000s, BUT PEAVEY IS NOW SLOWLY PHASING THESE OUT. SOME VALUES
HAVE ALREADY BEEN DISCONTINUED. WHEN STOCK RUNS OUT, NO MORE
WILL BE MANUFACTURED.
|
NEW PEAVEY # |
OLD PEAVEY # |
VALUE |
CENTER NOTCH |
|
31190337 |
71190337 |
A10K |
NO |
|
31190336 |
71190306
71190336 |
B10K |
NO |
|
31190326 |
71190326 |
B20K |
NO |
|
31190335 |
71190335 |
B50K |
NO |
|
31190338 |
71190338 |
A100K |
NO |
|
31190339 |
71190339 |
A250K |
NO |
|
31190311 |
71190311 |
A1M |
NO |
|
NOTE: THE 31190311 A1M POT ABOVE IS BEING DISCONTINUED
BY PEAVEY. WE CURRENTLY HAVE NONE
AVAILABLE. |
Part #P-VS-XX |
Starting at
$9.95 |
|
Click on photo for
larger view |
Peavey Potentiometer, Plastic D-Shaft, 11mm, PC-mount
with bracket, for Peavey Studio Pro 112, newer Envoy and Bandit models(Red Stripe),
and some other newer Peavey amps such as the ValveKing models. This
pot has 4 pins. Includes mounting nut.
|
NEW PEAVEY # |
OLD PEAVEY # |
VALUE |
|
31190900 |
71190900 |
B10K |
|
31190903 |
71190903 |
B20K |
|
31190906 |
71190906 |
A100K |
|
31190907 |
71190907 |
A200K |
|
31190908 |
71190908 |
B200K |
|
31190910 |
71190910 |
A1M |
Part #PV-VKG-XX |
$6.95 |
|
Click on photo for
larger view |
POTENTIOMETER NUT AND WASHER, METAL
Fits the Peavey Bracket Potentiometers (P-VBxxxx) and the
Peavey spider pots (P-VSxxxx). Metric threads M7x.075 zinc plated.
Part #PNW-16 |
$0.45 |
|
Click on photo for
larger view |
SAVE WITH MULTIPACK!
JNUT-38 JACK NUT AND WASHER, METAL,
SWITCHCRAFT™, SET OF 6
Genuine Switchcraft™ nut and washer set for the blackface/silverface Fender™ bias pot, Mesa Boogie pots, and the
CTS or Alpha pots with 3/8" bushing (found on original vintage Fender™
blackface and silverface), as well as Peavey™ and Switchcraft™
1/4" jacks. Does NOT fit the 24mm Marshall™ pots. Set of
6 washers and 6 nuts.
Part #JNUT-38-6 |
$4.95
(Set of 6 washers and 6 nuts) |
|
 |
POT
NUT AND WASHER, METAL, SWITCHCRAFT™
Genuine Switchcraft™ nut and washer set for the blackface/silverface Fender™ bias pot, Mesa Boogie pots, and the
CTS or Alpha pots with 3/8" bushing (found on original vintage Fender™
blackface and silverface), as well as Peavey™ and Switchcraft™
1/4" jacks. Does NOT fit the 24mm Marshall™ pots.
Part #JNUT-38 |
$0.99
(Set of 1 washer and 1 nut) |
|
WARNING: These products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.