Click on photo for
larger view |
 GENUINE
PEAVEY BLACK ENDS /BLACK STRAP GUITAR AMP HANDLE.
Black handle strap, metal reinforced. Black metal caps.
Screws and T-Nuts are NOT included. Screws and T-Nuts to fit are found
here. Handle strap is 7/8"
wide. Designed for screw holes set 7 3/4 inches apart. Total length of handle when properly mounted is 9
1/2 inches.
Part #PAH-301 |
$11.95 |
|
Click on photo for
larger view |
GENUINE PEAVEY CHROME
ENDS /BLACK STRAP GUITAR AMP HANDLE.
Black handle strap, metal reinforced. Chrome metal caps. Screws
and T-Nuts are NOT included. Screws and T-Nuts to fit are found
here. Handle strap is 7/8"
wide. Designed for screw holes set 7-3/4 inches apart. Total length of handle when properly mounted is 9-1/2
inches.
Part #PAH-302 |
$10.95 |
|
Click on photo for
larger view |
 Revisit™
NICKEL/BLACK GUITAR AMP HANDLE
- NICKEL-PLATED, WITH HARDWARE.
Rugged rubber black handle strap, steel reinforced. Polished
nickel metal caps.
10-32 screws and T-Nut mounting hardware are included. Handle strap is 7/8"
wide. Designed for screw holes set 8 1/4 inches apart. Total length of handle when properly mounted is
10 1/4".
Not recommended for Fender, as the screws are set too far apart for
Fender™ amp specifications.
Part #GAH-271C |
$10.99 |
|
Click on photo for
larger view |
Revisit™ BLACK GUITAR AMP HANDLE,
WITH HARDWARE.
Rugged rubber black handle strap, steel reinforced. Black metal caps.
Black 10-32 screws and T-Nut mounting hardware are included. Handle strap is 7/8"
wide. Designed for screw holes set 8 1/4 to 8 3/8 inches apart. Total length of handle when properly mounted is
10 1/4". Great replacement for the Budda Superdrive 30 (Series 1
only, pre-Peavey).
Part #GAH-271B |
$13.99 |
|
Click on photo for
larger view |
Revisit™ GUITAR AMP HANDLE
- BLACK.
Rugged rubber black handle strap, steel reinforced. Black metal caps. Screws not included - recommend using
our SC-403B Black 10-32 type screws along with a 10-32 T-Nut for secure mounting. Handle strap is 7/8"
wide. Designed for screw holes set 8 1/4 inches apart. Total length of handle when properly mounted is
10 1/4".
Part #GAH-1 |
$11.99 |
|
|
Click on photo for
larger view |
BLACK HANDLE SCREWS
Pack of 2 stainless-steel handle screws finished
in satin black for use
with black end-cap handles, such as our GAH-1 or GAH-271B or PAH-301. 1-1/4" Long, 10-32 threads, finished in satin black to match black end caps. Designed
to work with a 10-32 T-Nut, in cabinet wood of 3/4" or less.
Will not work with external nut - must be a T-Nut. Will not work
with cabinet wood thicker than 3/4".
See Data Sheet here
Part #SC-403B |
$0.99
(for a pack of 2 screws) |
|
|
Click on photo for
larger view |
HANDLE SCREWS
Pack of 2 stainless steel handle screws for
GAH-271C or PAH-302 Handle. 1" Long, 10-32 threads. Designed
to work with a 10-32 T-Nut, in cabinet wood of 3/4" or less.
Will not work with external nut - must be a T-Nut. Will not work
with cabinet wood thicker than 3/4".
See Data Sheet here
Part #SC-403 |
$0.99
(for a pack of 2 screws) |
|
WARNING: These products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. 